Installation guide

1. Alarm & Audio I/O (8-pin connection terminal):
Audio in
Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal)
Audio out
The Audio output (line level), which could be connected to a line output of a microphone system
or an active speaker with a built-in amplifier.
Alarm in
One digital photo-coupled input
Alarm out
One digital photo-coupled output (200mA)
2. Video Out
Analog BNC video output
3. Micro SD Card
Save snapshot images and video onto a Micro SD card.
4. Network Connector
The V960-N connects to the network via a standard network cable, and automatically detects the
speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket could also be
used to power the V960-N via Power over Ethernet (PoE). The camera auto-senses the correct
power level when using a PoE (Class 2) switch, router or injector.
5. Factory Default / Control Button
Press this button to install the camera using the Dynamic Domain Name Service (DDNS), or to
restore the camera configuration to its factory default settings.