Installation guide

8. Live
The V960-N can support up to 10 simultaneous users via Unicast.
With multicasting, V960-N can support an unlimited number of users. If supported on the network,
consider using the Multicast function, as the bandwidth consumption will be much lower.
Viewer Setup
Live View Protocol
RTP Unicast (UDP)/RTP Multicast (UDP)/RTP over RTSP (TCP).
Buffering Time (frame based)
Determines (0 ~ 90) x 1/30 sec (0 ~ 3 sec)
Viewer OSD Setup
Date: Determines whether the date is displayed; select ON or OFF.
Resolution: Determines whether the camera resolution is displayed; select ON or OFF.
Event State: Determines whether the event state is shown on display window (as shown in Live
view); select ON or OFF:
AI : Alarm In
AO : Alarm Out
M : Motion