Installation guide

7. Audio
The V960-N can transmit audio to other clients and can also play audio received from other clients.
This section describes the basic audio settings, such as setting the communication codec and
adjusting the sound levels for the microphone and speakers connected to the camera.
Enable Audio
Audio can be turned on or off by selecting ENABLE or DISABLE from the dropdown list.
Codec
Select G.711 u-law.
MIC/Speaker Volume
Select a volume for the microphone and speakers from 5-100 or Mute.
Audio Input
Audio from a connected line-in source can be connected to the Audio in connector on the V960-N
camera. If there are problems with the sound input being too low or high, you can adjust the input
gain for the microphone connected to the V960-N.