Installation guide

2. Installation
Select a location for the installation of the V960D camera. Be sure the area around the selected
location is clear of obstacles (such as steel beams, headers, pipes, electrical wiring, etc.) which would
interfere with the mounting of the camera and that the location can support the weight of the unit [the
V960D unit weighs 0.9 lb (400 g)]. Cables must be routed to the installation location. The V960D
mounts directly to a ceiling or wall.
Preparing the Camera Dome
1. Turn the bottom cover clockwise and separate the unit and the cover.
2. Separate the top cover and the camera unit.
3. Using the supplied template, make holes for routing the cables through the ceiling/wall and
mark screw holes.