Installation guide

4.
Micro SD Card
Save snapshot images and video onto a Micro SD card.
5. Reset Button
Press this button to install the camera using the Dynamic Domain Name Service (DDNS) or to
restore the camera configuration to its factory default settings.
6. Status LED
LED Color Indication System Status
Status
Green
(right)
On Network connection is established.
Flash Camera is booting up.
Red
(left)
Flash
Firmware Upload in progress.
HW factory default in progress
7. Video Output for Service monitor
This analog video output is available when installation mode is set to ON. Use supplied accessory
cable to video output.