Installation guide

1.
Network Connector
The V960D connects to the network via a standard network cable and automatically detects the speed
of the local network segment (10BaseT/100BaseTX Ethernet). This socket could also be used to
power the V960D via Power over Ethernet (PoE). The camera auto-senses the correct power level
when using a PoE switch, router or injector.
2. Power Connector
12 VDC or 24 VAC screw terminal power connector.
3. I/O Terminal Block for Audio and Alarm
3.1 Audio In
Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal)
3.2 Audio out
The Audio output (line level), which could be connected to a line output of a microphone system
or an active speaker with a built-in amplifier.
3.3. Alarm In
One analog (dry contact) alarm input.
3.4 Alarm Out
One relay output (2A: 120 VAC/60 VDC).