Installation guide

1.
Network Connector
The V960B connects to the network via a standard network cable and automatically detects the speed
of the local network segment (10BaseT/100BaseTX Ethernet). This socket could also be used to
power the V960B via Power over Ethernet (PoE). The camera auto-senses the correct power level
when using a PoE (Class 2) switch, router or injector.
2. Audio In
Audio in (line level), for line-in mono signal (only left channel is used from a stereo signal).
3. Audio Out
The Audio output (line level), which could be connected to a line output of a microphone system or an
active speaker with a built-in amplifier.
4. Alarm In/Alarm Out
One analog (dry contact) alarm input/One relay output (2A: 120 VAC/60 VDC). Mating connector is
supplied in accessory kit.
Pin Assignment