Installation guide

SD Write Mapping
Choose which types of events (Alarm In or Motion) will be recorded to the SD card by checking the
desired event.
Effective Period
Decide whether to save all the events that are happening at all hours of the day (Always), or only the
events that occur during specific times of the day. The Schedule method is used to save events on
the SD card during a specific time range. The start time and the end time can be set using the
dropdown list.
9.3 Periodical
Periodical SD Writing
This is the setting page to save the still shot in the Micro SD card periodically.
NOTE: This function cannot be used when Installation mode is turned ON. Set the first stream to
1280x720 or 1280x720 (wide) in the Video > Codec section, and second stream to M-JPEG or
‘None’.
The Directory and File Prefix fields are same as on the SD Card > Event page.
Interval allows for saving still images based on frequency (1 image every 10 sec, for example).
Use the drop-down control to set from 10 seconds to 1 hour.
Effective Period is configured the same as on the SD card > Event page.
Periodically, it saves the still image during a specific time range only.