Installation guide

Audio Input
Audio from a connected line-in source can be connected to the Audio in connector on the V960B
camera. If there are problems with the sound input being too low or high, you can adjust the input
gain for the microphone connected to the V960B.
8. Live
The V960B can support up to 10 simultaneous users via Unicast.
With multicasting, V960B can support an unlimited number of users. If supported on the network,
consider using the Multicast function, as the bandwidth consumption will be much lower.
Viewer Setup
Live View Protocol
RTP Unicast (UDP)/RTP Multicast (UDP)/RTP over RTSP (TCP).
Buffering Time (frame based)
Determines (0 ~ 90) x 1/30 sec (0 ~ 3 sec)
Viewer OSD Setup
Date: Determines whether the date is displayed; select ON or OFF.
Resolution: Determines whether the camera resolution is displayed; select ON or OFF.
Event State: Determines whether the event state is shown on display window (as shown in Live
view); select ON or OFF:
AI : Alarm In
AO : Alarm Out
M : Motion