Installation Guide XX263-20-01 V9360 Indoor Network Hemispheric Camera Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788 Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116 24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely error free or perform precisely as described in the documentation.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual Table of Contents 1. Precautions 3 Introduction 6 Package Contents............................................................................. 6 Features and Benefits .......................... Error! Bookmark not defined. Safety Instructions ............................... Error! Bookmark not defined. Physical Description ........................................................................ 7 2.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual Precautions Read these instructions Read all the safety and operating instructions before using this product. Heed all warnings Adhere to all the warnings on the product and in the instruction manual. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments/personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided if this occurs. Don’t open the housing of the product Cleaning Disconnect this video product from the power supply before cleaning.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual Damage Requiring Service Disconnect this video product from the power supply immediately and refer servicing to qualified service personnel under the following conditions. 1) When the power-supply cord or plug is damaged. 2) If liquid has been spilled, or objects have fallen into the video product. 3) If the video product has been directly exposed to rain or water.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual 1. Introduction Package Contents V9360 H.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual Physical Description Reset Button Ethernet Port Micro SDHC Card Slot Digital Input/Output Power LED 12 VDC Power Input Audio Input/Output 1) Reset Button Step 1: Switch off IP device by disconnecting the power cable. Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen). Step 3: Reconnect the power cable while continuing to hold the Reset Button.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual 2) Micro SDHC Card Slot* Insert a Micro SDHC card (*customer supplied) for local recording on camera. 3) Power LED This LED light will indicate current camera status. 4) Audio Input/Output (Indoor unit only) The IP device supports audio input and output via terminal block Audio terminal block Audio In/Out Red Green Audio In Audio Out 5) Ethernet Port The IP device connects to the Ethernet via a standard RJ-45 connector.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual Pin 1 GND Ground. Connect with Pin 3 for DI control loop. Pin 2 12 V Provides power to external devices with a maximum current of 100 mA. Voltage: 12 VDC, Max: 1.2 W Pin 3 Digital Input 1 Connect to GND (Pin 1) to activate or leave floating (unconnected) to deactivate. Must not be exposed to voltages greater than 30 VDC. Pin 4 Digital Connect to Pin 2 through external devices for DO loop.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual Using the Mounting Options V9360-WM Wall Mount If it is required to mount the V9360 to a wall, use the V9360-WM. Typical mounting hardware is provided; be sure to use mounting hardware appropriate for the mounting surface. 1. A mounting template is provided with the wall mount. Mark the mounting holes on the surface and drill mounting holes.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual 2. Accessing Camera If you have DHCP server router in your network: Many network server/routers are able to automatically provide IP addresses through DHCP. If you have DHCP on the network, just plug in your computer and IP Hemispheric Camera into the network and your IP device will acquire a network address by itself. Find and access the device with the IP Utility program. If you do NOT have DHCP server/router in your network: 1.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual 5. When the login window displays, input default user and password: Default User: Admin Password: 123456 6. After logging in, the Live View will display. To go to the main menu, click the ”Setup” button on the top left. If there is only a single camera, the procedure is complete to access the device.
V9360 Hemispheric Camera with Advanced WDR Hardware User’s Manual 7. From the Setup Page, select IP Settings -> Connection Type. 8. Change the IP mode to Static. 9. Change the IP to 192.168.0.102 or any other unused IPs. Do NOT use the PC’s IP address or 192.168.0.100. If this is not the first device being added to the network, avoid other devices’ IPs. 10. Click Apply. 11. Go to System -> Save & Reboot, and click Apply. Internet Explorer will close after a few seconds. This is normal. 12.
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A. Vicon Industries Inc. 89 Arkay Drive Hauppauge, NY 11788 Phone: 631-952-2288; Toll-Free: 1-800-645-9116; Fax: 631-951-2288 For service or returns from countries in Europe, contact: Vicon Industries (U.K.
Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmanship under Normal Use from the date of original retail purchase for a period of three years, with the following exceptions: 1. 2. 3. 4. 5. 6. 7. 8. Monitors, all models: One year from date of original retail purchase. Uninterruptible Power Supplies: Two years from date of original retail purchase.
Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-2288 800-645-9116 Fax: 631-951-2288 Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Vicon Germany Kornstieg 3 D-24537 Neumuenster Phone: +49 (0) 4321 8790 Fax: +49 (0) 4321 879 97 Far East Office Unit 5, 17/F, Metropole Square 2 On Yiu Street, Shatin New Territories, Hong Kong (852) 2145-7118 Fax: (852) 2145-7117 Internet Address: www.
