Technical data

9Troubleshooting
CamTel
svr
41
9 Troubleshooting
This chapter will support you in evaluating errors and help you with their
elimination.
What to do in the event of malfunctions / sabotage
Malfunction report The CamTel
svr

Error LED on the housing front side indicates malfunctions.
Moreover,certainmessageswillbereportedbyrelay,providedthisrelayhas
beenconfiguredasanErrorrelay.TheLEDErrorrelayindicatesthestateof
theErrorrelayforCamControl LITEorCamControl PROsoftware.
No null modem connection possible
A null modem connection between the transmitter and a CamControl
receiverstationisonlypossiblewith anoriginalnullmodemcable(indicated
by an orange-red sticker on the cable). Standard commercial null modem
cablescannotbeused.Refertothepinassignmentofthenullmodemcable
inthismanual.
Error/malfunction
CamTel
svr
reaction
Powerfailure Errorrelayopens(ifsoconfigured).
Videosignalfailure TheconditionwillbeindicatedbyLEDError
andreportedbytheerrorrelay(dependingon
configuration).
Thedeviceisswitchedoffbrieflyandswitched
backonimmediately.Fastswitchingoffand
onhastheimpactofapowerfailure.Waitfor
about10secondsafterswitchingoffthe
devicebeforeswitchingitbackonagain.
Errorrelayopens(ifsoconfigured).