Technical data

6PTZcontrol

32 CamTel

svr

Camera remote control interface

As physical camera interfaces may differ from camera system to camera

system,CamTel

svr

isequippedwithanRS-232aswellasanRS-485interface.

Thisavoidsadditionalcostsandreducesinstallationandwiringrequirements.

Thefollowingdiagramshowsthesystemdescribedabove:



Illustration:CameraremotecontrolwithCamTel

svr



Interface RS-232

Camerasystemdatalines(e.g.Dome)areconnectedwithterminalsTxD,RxD

andGND(see“28-/34pinterminalblock”onpage19).Pleasenotethatonly

one camera can be connected when using interface RS-232, for technical

reasons.

Interface RS-485

Camerasystemdatalines(e.g.Dome)areconnectedwithterminalsD-,and

D+.(see“28-/34pinterminalblock”onpage19).WithinterfaceRS-485,up

to 4 cameras can be remote controlled with CamTel

svr

 4 and up to 10

cameraswithCamTel

svr

10.

RefertotheenclosedinstallationCDformoredevicespecificdocumentation

onhowtoconnectandstartthecamerasystem.