Technical data

4Commissioning

CamTel

svr

tothesameCamTel

svr

atthe sametimeisdisplayedbytheCamControl

LITE software below the video window. Simultaneous connection to

severalCamControl LITEstationsaffectsCamTel

svr

performance.

■ YoucanenteruptofourTelephone numbers/IP addressesthatwillbe

processedintheeventofanalarm,accordingtoconfigurablecriteria.Field

onehastoppriority.CamTel

svr

alwaysdialsthesenumbersconsecutively

untiloneofthereceiversiscontacted.Thenumberofrepeatsdetermines

themaximumnumberoftimesthelistwillbeprocessed.Inaddition,the

systemcanbeconfiguredtoalways dialallnumbers.Thesametelephone

numberswillbeusedforroutinecallsandfortechnical

alarms.AlarmLED

will remain active until the telephone number list has been processed

accordingtothesetrepeats.

■ Select option Routine call every 24 hours, if you want to report

operability of yourCamTel

svr

at regular intervals toa CamControl LITE

station.Noimageswillbetransmittedduringthisconnection.Thecallswill

beloggedinthelogfilesofthereceiver.

■ CamTel

svr

checksallconnectedvideosignalinputsforvideosignalfailure

(faultycamera,faultyvideoline,lowcontrastimage,e.g.bycoveredlens).

Failureisreportedforactivecamerasifthevideosignalhasbeendisturbed

forabout10seconds.Thecheckintervalfollowstherespectiverecording

interval.In the eventofa

faultyvideosignal, rechecktakesplaceafter3

seconds.Recording isresumed aftererrorelimination.For nonrecording

videocamerasfailurewillbereportedafter60seconds.

Ifyourequireadditionalfeatures,pleaserefertotheadditionalconfiguration

options in files camtel.INI or camcontrol.INI. Refer to the respective

informationintheCamControl LITEorCamControl PROsoftwareonline

manuals.