Technical data

3Systemdescription
24 CamTel
svr
3.8 Device reset
ThefollowingmethodallowsyoutoreverttoCamTel
svr
factorysettings.This
resetisafulldevicereset,reactivatingfactorysettings.Allsettings,including
passwords and user names, will be deleted. If you want to delete only
passwords, use the Reset pushbutton described in chapter "Control,
indicators,andports".(see“Controls,indicatorsandports”onpage15)
The steps
one by one
■ SwitchtheCamTel
svr
off.
■ You need a 9 pin Sub-D plugwith pin 2 connected to pin 3, and pin 7
connectedtopin8.
■ Plug this reset plug into the interface labelled "Transp. data/Control
interface"(see“Pinassignmentandfunctionality”onpage19).
■ SwitchtheCamTel
svr
unitonandwaituntilLEDPoweronthefrontstarts
flashing.
■ Removetheresetplug.
■ YourCamTel
svr
 unit willbe ready again as soon as device reset and re-
initialisationhavebeencompleted.