Product specifications

Install Defaults
Finally, the Install Defaults option restores all SurveyorVFT settings to their
factory defaults. This affects all programmed functions. The table below shows the
main default settings; some defaults are camera dependent. When programming,
keep a record of settings as a reference if for any reason the unit must return to
factory defaults.
Function Default Setting
Max. Manual Pan Speed 180°
Max. Manual Tilt Speed 90°
Zoom Scalable Pan/Tilt Enabled
Focus Mode Auto
Shutter Speed Automatic
Backlight Compensation Enabled
Aperture Adjust Automatic
White Balance Automatic
Enable/Disable Input (Alarms) No (Disabled)
Enable Report to CPU (Alarms) No (Disabled)
Active Alarm State Low
Acknowledge Mode Manual
Set Actions No Action
Reset Actions No Action
Sector Censoring Enabled
Digital Zoom Mode Enabled
All Titles All Disabled
Title Fade Control Disabled, 1 sec
Enable Camera, Alarm, Preset, Lens Status Title Text Enabled
Enable Sector, Aux Function, Time, Date, Compass
Azimuth Title Text
Disabled
Text Size NTSC: line 1-1X, line 2-2X; PAL: line 1-2X, line 2, 3X
Language English
Relay Power On State Off
Output Type Latching
Time Display Format 12 hour
Daylight Savings Time Manual
Date Format MM/DD/YY
Main Programming Defaults Common to All Cameras (some defaults are camera dependent)
XX134-40-00 Rev 104 SurveyorVFT Camera Dome Programming Programming Menus • 23