Product specifications

Preset/Tour Handler
The Preset/Tour Handler function manages the 79 presets, 8 tours and 2
autotours resident in the SurveyorVFT. These features are available to the
operator regardless of the type of control device that controls the SurveyorVFT.
The first sub-menu in the Preset/Tour Handler allows a choice from several
options to Program Presets. Once the Preset Number is selected (1-79), these
include:
• Program Preset Position — Selection of this option writes the current
camera position into the selected preset number’s memory. This function
may also be performed by calling the preset from a system keyboard while
the keyboard is in Program mode. If a preset location is called from the
keyboard, and there is no preset position associated with that memory
location, the words “Preset Not Initialized” appear overlaid upon the video
image and the camera does not move.
• Program Preset Title - This option brings up the same menu as the
Display Controller/Preset Titles selection. See the Source Titling section
for a description.
• Clear Preset - Removes any preset information from this memory location.
• Clear ALL Presets - Removes all preset information from all memory
locations.
• Image Freeze – Freezes the image during preset solves, especially useful
when using digital recorders by eliminating the preset solve motion. If time
and date are enabled, time will also freeze to match image. Function can
be enabled or disabled.
Note: This mode should be used when a preset tour is run and the video is being
recorded on a DVR.
• Motion Detection – For the 23X (day/night) camera there is motion
detection capability. For each preset, there are 6 programmable zones for
motion detection with 3 sensitivity levels. Programmable actions may be
associated with each detection zone, including calling another preset,
turning a relay on or off, and calling a tour or autotour. For motion detection
to operate, the preset must be solved.
1. Select Motion Detection from the menu for the Preset number to be
set.
2. Enable Motion Detection using the joystick.
3. Select Motion Area to be programmed (1-6) using the joystick. Press
A/P to set area. (Screen will revert back to menu.)
4. Select Sensitivity Level (Low, Medium, High) using the joystick (Off is
same as Disabled).
5. Select Action and press A/P key. Select desired Action using the
joystick and A/P key.
After Motion Detection is set for a particular preset position, whenever that
preset is solved and there is motion in that area, the camera dome will perform
the programmed Action. If different actions are set for the same preset
number, multiple actions will take place. For example, a preset can be solved
for Area 1 and an AUX can be turned on for Area 2 simultaneously. If the user
18 XX134-40-00 Rev 104 SurveyorVFT Camera Dome Programming