User guide

Hewlett-Packard SCSI-Fibre Channel Router Installation and User Guide
Revision 2.1.0 Page
35
Figure 5-13. Serial Port Menu (for Device Router in Distance Solution)
5.2.4.1.2 ‘1’: Display VPD
This function is used to display important information (V
ital Product Data) for attached
SCSI-FC Router. See Figure 5-14 “VPD Screen”. In this function, an attached SCSI-FC
Router is referred to as the local SCSI-FC Router.
Figure 5-14. VPD Screen
1. To display the VPD screen of the local SCSI-FC Router, enter the number one ‘1’.
2. Product Type – The first line describes the use of the local SCSI-FC Router.
• SCSI-FC Router H - An ‘H’ represents host router.
• SCSI-FC Router D - A ‘D’ represents a device router.
3. SCSI-FC Router H/D Firmware Revision – These screen items provide the
firmware/microcode revision level and the date and time of development for the
respective routers.
4. Loader Revision – displays the local SCSI-FC Router’s loader revision level (for
internal use only).
5. Unique ID – displays the local SCSI-FC Router’s unique ID assigned by the
manufacturer.
6. Unit Serial Number – displays the local SCSI-FC Router’s Unit Serial Number.
7. PCB Number - displays the local SCSI-FC Router’s Printed Circuit Board number
(for internal use only).
8. DIP SW1 = 0000101 DIP SW2 = 1111111 – displays the DIP switch setting of
SW1 and SW2.