Specifications

NOTES
1. To stop the calibration operation, press the [s_] key.
2. a ~Err signs that the reference weight is over the full capacity.
3. The calibration is available with a reference weight of over 50% of the
scale capacity. Nevertheless, we recommend to adjust by a full capacity
weight. I-Err will appear if the load is less than 50% of the capacity.
4. £ - £
r r w
-j]i appear if the error exceeds 1% of the capacity, or any
other object than a reference weight. Or, perhaps the scale is defective.
Contact the shipper.
* From page 26 -
u o it • will not appear in setting at I SEt ! and
13 u h u
at tne same
time. The display will advance to an u
In this case, use a reference weight of the weight unit selected in
function q /
BATTERY OPTION (NiCd battery pack)
Charge hours
Operation hours
Auto-Sleep
Low Battery
Approx. 8 hours under power switch of the scale "OFF".
Approx. 5 hours continuous operation without output.
Sleeps 3 minutes after last operation, for power saving.
L0W-8ATT lights on when the voltage falls under the
specification.
- 21 -