Specifications

TROUBLESHOOTINGS
SYMPTOMS
Setting of
judgment points
impossible
Display does not
chanae with a loa
Display is
unstable
Erroneous value
reads in
display
Wrong linearity
No display
LOW-BATT lamp
lights
SLEEP lamp
lights
b-Err
appears
Unavailable
weighing upto
the capacity.
a ~ E r r
appears
u ~ E r~ r
appears
CAUSES & REMEDY
* Function setting is erroneous. See page 13.
* Reference value is over the capacity of the scale.
* Values are set as : 1st-^ 2nd ^ 3rd ^2" 4th
* The mode is not in a measurement mode. May be in such
i mode as : accumulation, or setting modes.
* Affected by a wind or oscillation. Check the location
and the response speed.
* The installation base is unstable. Check the base.
* Weighing pan or tare touches something. Check around.
* Wrong taring operation. See page page 7.
* Scale is not level. See level, page 5.
* The weighing pan or the tare touches something. Check.
* The span has chnaged by relocation or after long
time lapse. Calibrate the scale referring to page 26 .
* Characteristics have changed, or mechanism adjustment
• has changed by some reason. Contact the shipper.
* Adaptor is not connected, or the power switch is OFF.
* Battery has been consumed (with battery option).
Connect the adaptor, charge the battery.
* Battery voltage drop (with battery option).
Connect the adaptor, charge the battery.
* 3 minutes have passed after last measurement. Press
any key, or change the display by loading some (with
battery ODtion).
* Electronic error, by a static electricity or a noise.
Contact the shipoer.
* Gross load weight exceeds the scale capacity.
Weighing range = Full weighing range - Tare value
* Weighing range has changed by some damage on the
weighing mechanism. Contact the shipper.
* Something contacts the weighing pan to lift it.
* The balance of the mechanism has changed by some
reason. Contact the shipper.
* Check if the lock is opened.
- 25 -