Specifications

RANKING INDICATION OF JUDGMENT RESULT
1. Display of reference value at each set point
(Ex.)
mmcsmmammcmmcaaacaa
DDDGI DDDCI DDDDI DDGGI DDDDD ODDDD
i f t t
1st 2nd 3rd 4th
point point point point
In the L 5E t mode, pressing the [jsj key will read currently set
reference value at each point, which is shown by a bar at corresponding
position as in the above illustration.
2. Display of judgment result
When result is under the 1st point:
mmauma»mamma
mm ocoffl moDD
L
point
When result is between 2nd & 3rd point:
mmammamuammammamma
DOOOD DGCCQ IHOO DDDDD DDDOO OODOQ
t f
2nd 3rd
point point
BEEP SIGN OF JUDGMENT RESULT
See page 22.
SELECTION OF TWO WEIGHT UNITS
- continued from page 7, the column -
With the HG tuning-fork scale, you can weigh with two different or same
weight units, one in Mode A and the other in Mode B. For the contents,
see page 21 • From/to Mode A and Mode B, switchable by hitting [fj key.
1. Unit"kg", "g", "mg" and "ct" are indicated by character in the display.
Other weight units are indicated by ^ marks, upper in the display for
A mode, and lower in the display for B mode.
2. To change the weight unit, call
n
, I. ufl for mode A and 13. u.h
for mode B, after calling F
u
nc > referring to page 6,(7).
3. Contents for each parameters in 1 /,
U
_R mode and 13. u,b mode,
refer to page 21.
4. All additional functions than ordinary weighing are effective only in mode
* In relation to above 2, sticking small stickers printed weight unit *A.
may be convenient.
* Unit "3" is settable only in ORDINARY WEIGHING SCALE MODE.
- 18 -