Specifications

MANUAL SETTING OF POINTS FOR JUDGMENT

Setting.reference points (1 point to 4 points) by key operation, read

ranking or bar graph for result of judgment. Beep is available.

Convenient for measurement within a preset value.

(1)

(2)

(3)

(4)

Press the |_SJ key until L SEb appears.

M sign and some value will start blinking.

The value shows currently set value.

While the display is blinking, press the

T | key

to display "0" and bar graph underneath.

Now the manual setting is starting.

Pressing the [jj key further will change the last

digit of the display successively as follows.

Select an optional number.

• /"minus mark

Comparator function mode

decimal point

Pressing the [?J key will shift the number at the

last digit to the left. Set the second digit by

pressing the LL) key. As such, shift by [T] key,

and set a number by the [T] key to complete setting

a value.

L. SEb

Setting start

Input of value

Memorizing of 1st point

30g

(5) After completion of setting value for the 1st point, Memorizing of 2nd point

press the [sj key. After a black out for a moment,

a beep will come out with the set value to sign that

the value is memorized. Advance to set the next O

point by repeating above (2) to (5).

(6) When setting for all points are completed, the M Finish of setting

sign will disappear, and the mode turns to measurement

mode.

3d Ig

- 17 -