Specifications

3. PERCENT SCALE MODE
100% SETTING WITH REFERENCE SAMPLE
Percentage measurements by a reference sample as 100% memorizing in the
scale.
(1) Press the [D key to indicate "0". Tare/Zero setting
Also press the [T] key when use a
tare container.
0
L
\
(S
o
(2) Press the |_FJ key until P SEh appears.
M sign and some value will start blinking.
The value shows 100% reference value currently
set.
(3) Place a reference sample for 100% value on the
scale and press the L£J key.
After a black out for a moment, a beep
will come out to sign the memorization
of the value for 100%. Then the mode
turns to percentage measurement mode.
Unload the sample from the scale.
Reference setting
P. SEt
0.0 0 %
Reference memorizing
0.00 %
d3
ioD.no %
(4) Loading an object on the scale will
read the percentage to the reference
value memorized just before.
Percentage measurement
n n n v
u.U u %
mm m
* Division of measured percentage will vary according to the weight value
of the reference sample as 100% per capacity of the scale.
100% weiaht/scale caDacity
under 0.05%
0.05% —- under 0.5%
0.5 % -^y under 5 %
5 % ~ under 50 %
50 % and over
diSDlav division
L -Err
1 %
0.1 %
0.01 %
0.001 %
- 10 -