Specifications
Automatic unit weight
(6) Add. some more samples, but within improvement
three times of the quantity displayed,
to improve accuracy of the unit weight.
Without any key operation, thus, the
unit weight will be improved by
increasing samples by and by repeatedly.
rvV
.rVx
)O
BS pcs
Improvement (sampling) finish
g c
(7) At any
sample quantity
you
want
to
finish,
pressing
the j_Fj key
will finish
the O
improvement operation.
A
beep comes
out
and the
display will turn
to
ordinary
counting mode.
NOTES
1. If sample quantity added is over three times of the displayed amount,
Sub PCS will appear. Unload samples until the 5 u b PCS disappears.
2.
In case the accuracy of memorized unit weight is unsatisfactory,
Rdd _PCS will appear. Add samples until the R d d PCS disappears.
3. Under Sub or Rdd status, pressing the jT] key will memorise
unit weight for loaded samples. With such erroneous unit weight, counting
results may be incorrect.
4.
L -Err appears with such sample which unit weight is less than
1/200,000
of the scale capacity. In this case, counting operation is
impossible with this scale, because the unit weight of the object is
lighter than specified.
- 9 -