Specifications

2. COUNTING SCALE MODE
The HG scale employs unique automatic memory renewal system, namely Simple
Self Counting System.
By this SCS, highly accurate reference unit weight will be obtained auto-
matically, simply by adding optional number of samples (within three times
of that the display requires ).
COUNTING OPERATION BY SIMPLE SCS
(1) Place a container, if any, on
the scale and press the jjj key.
Verify that the display is "0".
(2) Press the [fj key and release it
when U 5 E t appears.
Tare/Zero setting
0 PCs
LH (S
Sampling start
U. SEt
Then a n I'lpcs appears. Press the UJ key
to select quantity of samples to be loaded.
By every pressing of the LLj key, the
quantity will change as follows:
r
(4) Load samples of the quantity selected in
the display. Press the [T] key to memorize
unit weight of loaded samples temporarily.
After a black out for a moment,
a quantity display and <J mark
starts blinking with a beep which
signs the memorization is over.
The blinking shows that the mode is
in unit weight improvement (sampling).
(5) Load optional quantity of samples
within tree times of the quantity
in the display. Then the unit
weight will be improved to that of the
total quantity of the samples loaded.
Beep will comes again.
Sample quantity selection
a n
PCS
U3 OS
m
o
Unit weight memolizing
10 pcs
E)
Automatic unit weight improvement
3 0 pcs