User`s manual

7
37. Now that the machine is up to temperature, make sure the components are clear of
descaling agent by flushing a good amount of clean water through the hot water spout,
bleeding some steam out of the steam wand, and using the brew cycle to run 4 to 6
ounces of water through the grouphead. Save a few ounces of water, and when it cools,
taste it. If the water tastes like the acid used in the cleaning agent, repeat the flush
process until the water is free from the acidic taste of the descaler.
38. Your machine is now descaled.
Any questions? Contact us at [e-mail]