VIBIAN XWATCH-10 SMARTWATCH FOR ANDROID USER MANUAL 1
Bluetooth smartwatch instructions How to restart: The user can insert a needle into the reset hole and press the reset button to make the smartwatch restarted. This hole is located on the bottom/back of the smartwatch. How to charge: The smartwatch must be placed in an ambient temperature of -10 ℃ ~ +55 ℃ and of ventilation when charging, and make sure to use the original USB cable supplied in the gift carton. Charging voltage is 5Volt 500mA.
The downloading, installation and applications of the APK on your smart phone The APK file "VIBIAN XWATCH10" is required to be downloaded and installed on the smartphone before you use the smartwatch. 1) APK file download and install. Visit the downloadsection at www.vibianworld.com to download the APK → Install the APK for VIBIAN XWATCH10 on the smart phone. http://vibianworld.com/download.php?CM_ID=81#.
2) Connect the smartwatch with your smartphone by Bluetooth. Settings on your smartphone → Click Bluetooth → Find Bluetooth ID "U8" in Bluetooth device list → Pair the smartphone with Bluetooth ID “U8” The smart phone will receive a "Bluetooth pairing request" and then press "confirm" for pairing. After pairing the VIBIAN XWATCH10 it will prompt "**Connected”. This indicates that a successful connection has been established between your smartphone and the VIBIAN XWATCH10 model U8 smartwatch.
This port is used for the internal Li-Polymer battery charging. Input voltage is 5Volt 500mA. Please use the supplied micro USB cable. G. Speaker Please do not cover this speaker while you are calling otherwise you can not hear the people that call you. H. RESET hole This is located on the back/bottom of the watch. Use a paperclip and insert it gently in this hole to achieve the system to reset when the watch is functioning abnormal. 5) Below is the introduction of the main menu.
View: The smartwatch can view full name and number. Press the number or contact, and the smartwatch can make a call. E. Camera: Press this function, the smartwatch will show the reminder “Please install “smartwatch APK” in your smartphone” Before using this function, your smartphone must have installed the VIBIAN XWATCH10 smartwatch APK software. Now you can use the smartwatch to make a picture remotely using the camera of your smartphone. This is convenient for making for example selfies remotely. F.
J. Barometer: Open this function to display the current atmospheric pressure (hPa) and the current temperature in degrees Celsius. K. Altimeter: Calculation of the relative height in meters distance upward or downward after pushing the reset icon at your starting point.
