Instruction Manual

AMPLIFIER STRAPPING

Two VIBE BlackDeath Bass 2 am plifier s are capable of being str apped together to deliver the combined output of both

amplifiers into a single channel.

NOTE: only identical amplifiers may be strapped t ogether.

See page 9 for wiring configuration.

Strapping procedure

· Connect the RCA input from t he sour ce unit to the left and right RCA input of the m aster am plifier .

· Connect a mono RCA lead between the SLAVE OUT output of the master am plifier and the SLAVE IN input.

· Set the input mode switch of the master amplifier to normal.

· Set the input mode switch of the slave amplifier to slave in.

· Connect speaker cable between the negative speaker output of the master am p and the negat ive speaker

output of the slave amplifier . The cable must be of the same gauge you will be using t o connect the amplifiers to

the subwoofer .

· The master positive speaker out put is t o be connected to the subwoofer positive terminal.

· The slave positive speaker output is to be connected to the subwoofer negative terminal.