Owner's Manual

Flush Mount Installation

Figure A

For ease of installation there are two ways of xing the tweeters in place.

The rst requires the use of the metal ring provided. (See Figure A)

• After nding a suitable position for the tweeters place the cut out template for the

tweeter in position and mark around it.

• Before cutting the holes double check that no brake, fuel lines or wiring harnesses are

likely to get damaged.

• Ensure that the tweeter when tted will not catch on any moving parts such as door /

window handles.

• If mounting in a door check that the window can still be fully lowered before installing.

• Cut out the hole carefully.

• Place the entire tweeter into the cut out hole.

• From the back push the metal ring over the rear of the casing until it is tight into the

cutout hole.