Component 6 BLACKDEATH6C-V6 Component Speaker
Owners Manual Congratulations on purchasing your VIBE speakers. Please read this manual in order to fully understand how to get the best results from this product and ensure that all advice on how to look after the product is followed. Thank you for buying VIBE, we hope you enjoy listening to your product as much as we enjoyed creating it. WARNING DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire, shock or damage to the product.
Limited Warranty All VIBE products carry a full 12 month warranty, valid from the date of the original receipt and proof of purchase (UK only). The online warranty card should be completed within seven days of the original purchase date. The original receipt and packaging should be retained for this twelve month period. If the product develops a problem any stage during the warranty period, it should be returned to the point of purchase in it’s original packaging, and complete with no items missing.
Speaker Installation Guidelines Firstly, make sure that the speakers will fit in your chosen location. This may involve the removal of the standard vehicle speakers. Please use the mounting depth and hole cut dimensions as detailed in this manual for guidance. • If necessary cut any material away to allow the speaker to sit correctly. • Cut out the mounting hole and pre-drill any other fixing holes. • Screw through both gasket and speaker until the speaker is securely fastened.
Tweeter Installation Guidelines The tweeter can either be fitted flush or surface mount. Try and take into account the following when locating a suitable position. For optimum staging try and locate a position that is higher than the woofer but within twelve inches (maximum) of it. It is vital that the tweeter is adjusted so that it is focused towards the listener. Surface Mount Installation After finding a suitable position for the tweeters, place the base of the tweeter casing in the correct position.
Flush Mount Installation For ease of installation there are two ways of fixing the tweeters in place. The first requires the use of the metal ring provided. (See Figure A) • After finding a suitable position for the tweeters place the cut out template for the tweeter in position and mark around it. • Before cutting the holes double check that no brake, fuel lines or wiring harnesses are likely to get damaged.
Flush Mount Installation (Cont) The second requires the use of the metal strip provided. (See Figure B) • After finding a suitable position for the tweeters place the cut out template for the tweeter in position and mark around it. • Before cutting the holes double check that no brake, fuel lines or wiring harnesses are likely to get damaged. • Ensure that the tweeter when fitted will not catch on any moving parts such as door / window handles.
Wiring Connections To A Headunit • Connect the speaker to the speaker wiring in the vehicle ensuring that correct polarity is observed. Positive: Black / white stripe Negative: Black Wiring Connections To An Amplifier • Connect the speaker to the speaker wiring in the vehicle ensuring that correct polarity is observed.
UK Technical Enquiries Call 09067031420 Calls cost 50p per minute. Call costs correct at date of publication (01/02/12) Hours of business 9.00am - 5.30pm GMT Monday - Friday. All calls are recorded for training purposes. MIDBASS Distribution PO Box 11000 B75 7WG International Technical Enquiries For international technical support please contact the distribution agent for your country. Please visit www.vibeaudio.co.uk for more details.
Specification 33mm 23.8mm BLACKDEATH6C-V6 Component 2-way 6.5” (165mm) 140 watts 420 watts 70 watts 93dB 45Hz - 25kHz 4Ω 50.6mm 60.2mm 84mm m 65mm 139mm 100mm 17 3.
Notes:
Designed and engineered in England www.vibeaudio.co.uk www.youtube.com/vibeaudio www.facebook.com/vibeaudio www.twitter.