User`s manual

Woofer installation. - BlackAir 5 & 6
1. If necessary cut any material away to allow the speaker to sit correctly.
2. Cut out the mounting hole and pre-drill any other fixing holes.
3. If the grill is to be fitted, place it over the speaker and screw through both grill and speaker using the screw provided until the
speaker is securely fastened.
4. If no grill is fitted then securely screw the speaker into place using the screws provided.
Crossover installation BlackAir 5 & 6
The crossover units are designed to be mounted as close to the woofers as possible.
1. Locate a suitable mounting place for them.
2. Remove the lid by twisting anti clockwise 1/4 turn
3. Mark the two mounting holes inside the crossover unit.
4. Drill these holes out.
5. Secure the crossovers with the screw provided.
+-
+-
+-
Car audio and car goods internet store Winauto
winauto.ua