Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 7 Connectivity
Remote Control
User Manual 7SMART102 Rev006 77
1 Install a VNC viewer on your PC and open a VNC window.
2 Considering
10.33.22.49
is the IP Address of the SmartOTDR (as shown
Figure 39 on page 52), enter this IP address in the VNC window
3 Press Enter to validate.
The screen of the SmartOTDR appears offset on your PC.
Virtual control buttons bar
It is possible to emulate hard keys with Virtual Control buttons. This virtual control bar is
especially useful when the SmartOTDR screen is exported on a remote PC.
To display those buttons, click once on the top of the screen in the status bar, at the same
height than the date and time.
Figure 61 VNC wind
ow
NOTE
Once Remote screen is accessible via VNC, the icon displays on the
upper banner of the screen until the connection is cut or the SmartOTDR is
switched off.
Figure 62 Virtual control buttons bar