Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 7 Connectivity
Remote Control
76 User Manual 7SMART102 Rev006
VNC
The SmartOTDR can be used in combination with a PC in order to transfer the Interface
onto a PC.
The transfer of the interface can be done using a VNC window on PC.
Transferring the interface on a PC via WIFI or
Ethernet
Once the connection is established between the SmartOTDR and the PC, proceed as
follow:
Figure 60 Fil
e Explorer with cloud storage
Edition
menu
The cloud storage is automatically disconnected once the SmartOTDR
is switched off. Reconnect from the System Settings page of the Smar-
tOTDR after the Platform restart.
For an intensive use of the deport screen or when it is used via a WAN
network, it is strongly recommended to use a dedicated VNC client.
The VNC clients recommended are Tight VNC (V 1.2.9 or later) and Real
VNC (V 4.1.1 or later).