Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 7 Connectivity
Remote Control
74 User Manual 7SMART102 Rev006
Transferring files to/from a PC via WIFI or Ethernet
Once connection is established between the Platform
and the PC:
1 On the PC, use an FTP client, and access to internal memory via an internet
browser page (I.E, Mozilla Firefox...).
2 In the address bar, type the following address (10.33.16.229
being the IP
address of the SmartOTDR defined when the connection was configured):
ftp://mts1000:JDSU@10.33.16.229/disk/
Thi
s allows to access to internal memory.
ftp://mts1000:JDSU@10.33.16.229/usbflash/
Thi
s allows to access to the contents of the USB memory stick connected to the
SmartOTDR.
3 If an identification is required, enter:
– User name: mts1000
– Password: JDSU
The PC
then displays the contents of the internal memory or of the USB memory
stick from the SmartOTDR.
Figure 58 Conf
irmation of file receiving
WARNING
The files stored in bluetooth-inbox will be lost once the SmartOTDR is
switched off. Copy/Paste the files to keep toward another storage
media (disk, usb key...).