Manual

Chapter 7 Connectivity
Establishing connection
User Manual 7SMART102 Rev006 53
– Select Manual to enter manually the Proxy address
– Select Auto and enter the Pac address.
Creating a network from the SmartOTDR
A WIFI network can be created from the SmartOTDR, in order to associate it to a Smart-
phone or Tablet.
1 From the Home page, press Connectivity > Wireless 802.11.
2 On the Setup screen, select the Wlan Mode for WIFI connection: Ad-hoc (IBSS)
or AP Master.
3 Press Create Network menu key and wait for the network creation.
The network creation on platform is completed once the dialog box is no more
displayed.
4 On the Smart device, open the Wifi setup age.
5 Check the Platform has been detected (SSID identifier displayed in the list of
WIFI networks found)
6 Touch this SSID and follow the instruction on your Smart Device to link it to the
Platform.
Via Ethernet
The connection between SmartOTDR and PC can be done directly, or via a local
network.
Connecting the SmartOTDR and the PC
1 Connect the SmartOTDR to the PC via an Ethernet cable, using the USB
Ethernet - adapter and an ethernet cable.
Figure 40 Con
nection SmartOTDR and PC