Manual

Chapter 7 Connectivity
Establishing connection
User Manual 7SMART102 Rev006 51
7 Select the desired network to connect to.
8 Press Select menu key to validated the connection.
The display goes back to Setup screen.
The SSID parameter is automatically configured with the one selected.
9 In Encryption parameter, select the type of encryption wished: None, WEP
Static, WPA Personal, WPA Enterprise.
10 According to encryption type selected, enter Login (if any needed) and Key/
Password.
11 In the AutoConnect parameter, select if the connection to SSID selected must be
done automatically (On) or not (Off).
Connection to SSID
Once configuration is valid, connect the SmartOTDR to the Wireless network:
1 In the Setup screen, press Connect SSID menu key.
or
If AutoConnect is defined to On, the connection is launched automatically.
Once association of Platform with SSID is established, the icon becomes
to indicate the connection is active.
Figure 38 Li
st of SSIDs found
NOTE
Login and Password are kept in memory, even if the WiFi is deactivated or
the SmartOTDR switch off and restarted.