Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 6 Microscope application
Configuring the microscope
User Manual 7SMART102 Rev006 39
4 Touch the Add softkey to add a new tip setting:
a Co
py the new tip setting onto a USB flash drive.
b Plug the USB drive into the instrument.
c Navigate to the USB drive.
d Select the tip setting file.
e Touch Load.
5 T
ouch the setup icon next to Profile to manage profiles.
6 Touch the check boxes next to the profile name to define what profiles will appear
in the Profiles dropdown box
7 Touch the Add softkey to add a new profile:
a Co
py the new profile onto a USB flash drive.
b Plug the USB drive into the instrument.
c Navigate to the USB drive.
d Select the profile file.
e Touch Load.
Figure 27 Manage Profiles