Manual

Chapter 6 Microscope application
Configuring the microscope
User Manual 7SMART102 Rev006 33
The profile contains the failure criteria used during automated assessment of the
end face image.
5 Touch the Tip Setting dropdown box
and select the Tip Setting to be used to
il
luminate the fiber end face.
Only tip settings that are valid for the
sel
ected profile will be displayed.
• It is important to select the appropriate tip setting for the inspection tip connected
to the probe
• The tip setting changes how the fiber end face is illuminated. The objective is to
provide enough illumination to expose defects, while not providing too much illu-
mination such that there is a lack contrast between the end face and a defect.
6 Touch the Capture Button dropdown box to change the operation of the Test
softkey and probe capture button/trigger.
Freeze & Test: the live end face image is captured, and an automated profiled-
based analysis is performed
Freeze image: the live end face image is captured
7 Touch the Auto Center dropdown box to change automated image centering
Yes: the end face image is automatically centered within the image view window
No: automated image centering is disabled
8 Touch the Advanced Focus dropdown box to change Focus meter appearance
Figure 20 Prof
iles’ List