Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 6 Microscope application
Connecting the microscope
30 User Manual 7SMART102 Rev006
5 Verify that WLAN Mode = Wireless Client
6 Touch S
CAN SSID to locate the microscope.
7 Touch the FiberChek SSID.
8 Touch Select.
The FiberChek SSID will appear under Configuration.
9 Touch Connect SSID.
The WIFI icon will change if the connection is successful.
10 Return to the Home page.
11 Launch the
Microscope application .
More than one application may be active on the instrument (e.g., both inspection
and OTDR).
12 Connect the probe to the fiber being inspected using the appropriate tip.
FiberChek probe USB Connection
1 Connect the micro-USB end of a micro-USB-to-USB-A cable to the micro-USB
port on the FiberChek probe.
2 Plug the USB-A end of the cable into a USB port on the instrument.
Fig. 16 Microscope FiberChek detected via WIFI