Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 6 Microscope application
Connecting the microscope
User Manual 7SMART102 Rev006 29
Connecting the microscope
P5000i probe USB connection
1 Plug the P5000i probe into a USB port from the SmartOTDR.
2 Touch the Home button
3 Launch the Microscope application .
More than one application may be active on the unit (e.g. both inspection and
OTDR)
4 Connect the probe with the fiber being inspected using the appropriate tip.
FiberChek probe WIFI connection
1 Turn on the microscope.
2 Enable the WIFI connection on the microscope.
3 On the unit, press the H
OME button.
4 Touch Connectivity > Wireless.
Fig. 15 FiberChek Probe Overview
Power Button (side)
Inspection Tip
1
2
Touchscreen Display
5
Action Button
4
Manual Focus / Navigation Control
3
Magnification / Return Button
7
Micro-USB Interface (bottom)
8
Autofocus Trigger
6