Manual

Chapter 3 Starting up
Built-in kickstand
16 User Manual 7SMART102 Rev006
Built-in kickstand
When used outside of its hand-free soft case, the unit can be set on a flat surface (table,
ground...) that is stable and not exposed to vibration.
The unit can be used with the built-in kickstand closed ("seated user" position) or pulled
out ("standing user" position).
To change the stay from “seated user” position to “standing user” position, pull the stand
outside of its housing until the stop.
Push the stand to return to «seated user» position.
NOTE
Unless specified otherwise in this documentation, the settings configured on
the unit are kept in memory even when the unit is turned off.
NOTE
If the unit stops responding, you can force a hardware reset by pressing and
holding down the ON/OFF button for about 4 seconds.