Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 9 Technical specifications
General specifications
96 User Manual 7SMART102 Rev006
General specifications
Display specifications
Screen
• Backlight high visibility color capacitive touchscreen
• Size: 5 inches
Resolution
• 800 x 480 pixels
Memory
Standard memory: internal memory, with a capacity of 2GB (with a minimum of about
125 Mb are available for data storage).
Input/Output
• Two USB 2.0 host ports.
• One Mini USB 2.0 device
• Built-in buzzer
• Built-in WIFI/Bluetooth (BLE) (optional)
Battery
The instrument is supplied with one Lithium-Polymer battery.
Li-Po Battery charging time
If the battery is completely discharged, the time taken to recharge is:
• approximately 5 hours, if the apparatus is not in use (Charge indicator solid red)
• about 10.5 hours if the instrument is used during charging (On indicator lit in fix
green, Charge indicator lit in solid red).