Manual

Chapter 8 File management
Storage media
92 User Manual 7SMART102 Rev006
Storage media built into the SmartOTDR
The SmartOTDR is delivered with an internal memory, which maximum capacity is of
2GB (with a minimum of about 128 Mb are available for data storage).
External USB storage media
The SmartOTDR is equipped with 2 USB ports as standard. One of these can be used
to connect an external storage medium, in particular a USB memory stick.
USB memory stick connection
1 Insert the USB memory stick in one of the SmartOTDR's USB port.
A sound is emitted to confirm the successful insertion and recognition of a USB
memory stick.
Then, the icon is displayed in the upper banner to inform the user the USB
stick is ready to be used.
USB memory stick disconnection
1 Before disconnecting the USB memory stick, always select a storage device
different from usbflash (select disk for example) in the explorer.
2 Make sure you no longer have any running applications using the usbflash
storage media.
3 The user must push the
EJECT USB key, available in File Explorer.
The icon becomes to indicate it can be removed safely. In this state, the
USB stick cannot be used anymore
NOTE
Although two USB ports are present, it is not possible to use simultaneously
more than one external USB storage medium.
When a file is moved in the explorer of the Platform, the end of the
move on the screen does not mean that writing of data into the mem-
ory is complete. Some data may still be in a writing process if the stor-
age unit is removed prematurely.