Manual

30 OLP-35V2/-35SC/-38V2
8 SPECIFICATIONS
GENERAL SPECIFICATIONS
General specifications
Memory
Calibration
interval
Power supply
EMC and safety
Environmental
conditions
Occasional condensation is tolerable as a limit condition.
Dimensions
and weight
Wavelength detection
1)2)
1) Only in conjunction with Viavi OLS-3x Optical Light Sources.
Automatic switching and
displaying wavelengths
Modulation detection
2)
2) BN 2333/12/14 for levels > -50 dBm
BN 2333/13 for levels > -35 dBm
CW, 270 Hz, 330 Hz, 1 kHz, 2 kHz
Optical adapter system
OLS-35V2/-38V2
OLS-35SC
UPP 2.5 mm (1.25 mm optional)
Fixed SC
both suitable for PC and APC systems
Memory capacity 1000 measurement results
Data readout via USB-C interface
Recommended calibration interval 3 years
Dry batteries 2 x AA, 1.5 V
(never use batteries based on lithium)
Rechargeable batteries NiMH, 2 x AA, 1.2 V
Power consumption 2.5 W max.
Operating life with dry/
rechargeable batteries
typ. 80 h
(Bluetooth® off)
AC line operation With separate 5 V DC USB adapter.
Use EMC and Safety certified
low energy adapters only.
Power saving Auto power-off after approx. 20 min
(can be disabled)
Electromagnetic compatibility (EMC) EN 61326-1:2013
Device safety EN 61010-1:2010
Operating temperature range -10 to +55 °C (14 to 131 °F)
Storage and transport -40 to +70 °C (-40 to 158 °F)
Altitude 2000 m max. (6500 ft. max.)
Pollution degree 2
Ingress protection IP44
Relative humidity up to +31 °C 15 to 85 %
Absolute humidity > +31 °C 1 to 29 g/m
3
Dimensions (H x W x D) 30 x 80 x 150 mm (1.18 x 3.15 x 5.90 in)
Weight (incl. batteries) 200 g (0.44 lb)