Manual

16 OLS-34V2/-35V2/-36V2/-38V2
4 OPERATION
THE SETTINGS MENU
The Settings menu
The following settings can be changed in the settings menu.
J To open the settings menu long press [MENU].
Selecting Single-/Multimode (OLS-36V2 only)
J Press [] to toggle between SM and MM.
According to the selected mode port 1 or port 2 is active.
Selecting a wavelength
Selectable wavelengths:
• OLS-34V2: 850/1300 nm
• OLS-35V2: 1310/1550 nm
• OLS-36V2: 850/1310 nm (SM), 1310/1550 nm (MM)
• OLS-38V2: 1310/1550/1625 nm
To select a wavelength:
I OLS-36V2: SM or MM is selected
1. Press
[MODE] to skip through the modes and select Single-.
2. Press [] to select a wavelength.
Item Settings Description
Hour
1...12
J Press [
] to change
setting:
– Press once to change one
step at a time.
– Hold down the key to
increase the step change
rate.
Minute
1...59
Year
2020...2030
Month
01...12
Day
01...31
About
Show device data
including last
calibration date
J Press
[] to confirm setting.
J Press [ ] to return to the
settings menu.
Factory Reset
Reset
ECON
ON/OFF
ON = ECON
OFF = PERM
Press
[ ] (right context
key to toggle ON/OFF