OLS-34V2 OLS-35V2 OLS-36V2 OLS-38V2 SmartPocket™ V2 Optical Laser Sources User Manual BN 2334/98.11 2021.
Please direct all inquiries to your local Viavi sales company. The addresses can be found at: www.viavisolutions.com/en-us/contact-sales-expert A description of additional instrument features can be found at: www.viavisolutions.
CONTENTS CONTENTS I NTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 OLS-3xV2 Optical Light Sources. . . . . . . . . . . . . . . . . . . . . . . 5 User manual update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Symbols used in this user manual . . . . . . . . . . . . . . . . . . . . . 6 SAFETY I NFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 GETTING S TARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS ORDERING I NFORMATION . . . . . . . . . . . . . . . . . . . . . . . . 25 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 P RODUCT R EGULATORY COMPLIANCE . . . . . . . . . . . . . . .
1 I NTRODUCTION OLS-3 X V2 OPTICAL L IGHT SOURCES 1 I NTRODUCTION OLS-3x V2 Optical Light Sources The Test Sets are specially designed for high performance testing of all systems, i.e. broadband, PONs, and Gigabit Ethernet. Battery operation from two AA batteries and the robust, shockproof design provide long operating time in the field even under tough conditions. AC line operation via a separate AC adapter and the USB interface ensure ease of use in the laboratory or production environment.
1 I NTRODUCTION SYMBOLS USED IN THIS USER MANUAL Symbols used in this user manual Various elements are used in this user manual to draw attention to special meanings or important points in the text. Symbols and terms used in warnings The following warnings, symbols and terms are used in this document in compliance with the American National Standard ANSI Z535.6-2011: NOTICE Follow the instructions carefully to avoid damage to or destruction of the instrument.
SYMBOLS USED 1 I NTRODUCTION IN THIS USER MANUAL Warning format All warnings have the following format: WARNING Type and source of danger Consequences of ignoring the warning J Action needed to avoid danger. The following character formats are used in this user manual: I Requirement This requirement must be met first; e.g. I The system is switched on. J 1. 2. Italics Instruction Follow the instructions given (the numbers indicate the order in which the instructions should be followed); e.g.
2 SAFETY I NFORMATION SYMBOLS USED IN THIS USER 2 MANUAL SAFETY I NFORMATION J All safety information for your device can be found in the printed booklett “ Safety, Disposal and Environmental Protection“ provided with your device. J Carefully read and follow all instructions given there. The booklett “ Safety, Disposal and Environmental Protection“ is attached to this pdf. You can open it from the attachment window or by clicking the thumbnail on the left.
3 GETTING S TARTED U NPACKING THE DEVICE 3 GETTING S TARTED Unpacking the device Packing material We suggest that you keep the original packing material. It is designed for reuse (unless it is damaged during shipping). Using the original packing material ensures that the device is properly protected during shipping.
3 GETTING S TARTED D EVICE OVERVIEW Device overview 2 OLS-36V2 2 1 3 4 5 6 OLS-35V2 1 2 3 4 Test head cover SC adapter. OLS-36V2: Port A (SM, left), Port B (MM, right) Display Key pad Representation in the user manual: Context sensitive keys (here left key is selected) [] [MODE] Mode/Settings key [ E] Power key [ON/OFF] 5 6 10 Laser on/off USB interface For power supply and measurement data downloads and updates.
3 GETTING S TARTED P OWER SUPPLY Keys The key pad contains two types of keys: • Contex t sensitive keys: The functions of these keys depend on the selected mode or menu and is shown in the display above the key. • Function keys: The functions of these keys are always the same and shown on the key itself. Press to switch the device on/off.
3 GETTING S TARTED P OWER SUPPLY Battery operation WARNING Dangers when handling batteries Handling batteries may be dangerous. Please note the following safety instructions. J Please note the battery operation safety information in the booklett “ Safety, Disposal end Environmental Protection” provided with your device. Replacing the batteries J Do not replace individual batteries. Always change both batteries at the same time. J Always use batteries of the same type; i.e.
3 GETTING S TARTED P OWER SUPPLY Protecting the environment Please dispose of any unwanted dry batteries and rechargeable batteries carefully. They should also be removed from the instrument if it is to be scrapped. If facilities in your country exist for collecting waste or for recycling, please make use of them rather than throwing the batteries in the normal trash. You will often be able to return used batteries to the store where you purchase new ones.
4 OPERATION SWITCHING THE DEVICE ON / OFF 4 OPERATION Switching the device on/off The OLS-3xV2 has two battery power modes: Mode Icon Description Permanent ON (PERM) The device is switched on permanently. Automatic OFF (ECON) The device switches off 20 minutes after the last operation. This function is only available when the device is powered from batteries. To switch the device on/off : J Press [ E] to switch the device on/off.
4 OPERATION D ISPLAY ELEMENTS Display elements The following elements can be found in the display. 1 2 3 Display of one power level in Single- mode. Display of two power levels in Multi- mode. 1 – Status bar Auto- Multi- Single- Selected/active mode The mode can be changed via the [MODE] key. 7:15 Real Time Clock Time can be changed via the settings menu. Battery status in PERM power mode: The device remains switched on.
4 OPERATION T HE S ETTINGS MENU The Settings menu The following settings can be changed in the settings menu. J To open the settings menu long press [MENU]. Item Settings Description Hour 1...12 Minute 1...59 Year 2020...2030 Month 01...12 J Press [ ] to change setting: – Press once to change one step at a time. – Hold down the key to increase the step change rate. Day 01...
4 OPERATION ENABLING SIGNAL MODULATION Enabling signal modulation Modulation frequencies provided by the OLS-3xV2: CW (continuous wave), 270 Hz, 330 Hz, 1 kHz, 2 kHz NOTE: Signal modulation is available in Single- (all models) and Singlemode (OLS-36V2) only. To select a modulation frequency: I Single- is selected. J Press [] to skip through the list: CW 270 Hz 330 Hz 1000 Hz 2000 Hz CW ...
5 DATA E XPORT AND F IRMWARE U PDATE USB AND S MART R EPORTER 5 DATA E XPORT AND F IRMWARE U PDATE The USB interface or the Bluetooth® interface (OLP-3xV2 only) can be used for data export and firmware update. USB and SmartReporter When using the USB interface the SmartReporter allows you to easily transfer stored measurement data to a PC and to update the firmware. The SmartReporter reporting tool always contains the latest Firmware Revision for all your SmartPocket™ V2 devices.
6 M AINTENANCE CLEANING THE TEST PORT 6 M AINTENANCE WARNING Invisible laser radiation Maintenance or cleaning of the instrument while it is connected or operating may damage the instrument or injure you. J Make sure that the instrument is switched off and disconnected from all power sources and optical radiation sources before maintenance or cleaning. J Do not open the instrument for maintenance or service. Service shall be performed by Viavi trained personnel only.
6 M AINTENANCE CLEANING THE INSTRUMENT Cleaning the instrument If the device gets dirty through use, you can clean it using a soft cloth moistened with a mild solution of detergent. NOTICE Water and cleaning fluids The instrument may be damaged or destroyed if water or cleaning fluids penetrate it. J Make sure that water or cleaning fluids do not get inside the device.
7 SPECIFICATIONS OLS-34V2 7 SPECIFICATIONS OLS-34V2 Source type Fiber type Optical interface Auto- mode Modulation frequencies Multi- mode Wavelength(s) Spectral width (FWHM) Output power (CW, typical) Stability1) • Short term (15 min) • Long term (8 h) LED Multimode (MM) 50/125 SC adapter yes CW, 270 Hz, 330Hz, 1 kHz, 2 kHz yes 850 nm (20 nm) 1300 nm (-20/+40 nm) < 170 nm -20 dBm 0.02 dB 0.05 dB 1) after 20 min. warm-up, at ambient temperature -10 °C to +55 °C, T = ±0.
7 SPECIFICATIONS OLS-36V2 OLS-36V2 Source type • Port A • Port B Fiber type • Port A • Port B Optical interface Auto- mode Modulation frequencies Multi- mode Wavelength(s) • Port A • Port B Spectral width (FWHM) • Port A • Port B LASER LED Singlemode (SM) 9/125 Multimode (MM) 50/125 2 SC adapters yes CW, 270 Hz, 330 Hz, 1 kHz, 2 kHz yes 1310 nm (20 nm) 1550 nm (20 nm) 850 nm (20 nm) 1300 nm (-20/+40 nm) < 5 nm <170 nm Output power (CW, typical) • Port A • Port B -3 dBm -20 dBm Stability1) • Short
7 SPECIFICATIONS OLS-38V2 OLS-38V2 Source type Fiber type Optical interface Auto- mode Modulation frequencies Multi- mode Wavelength(s) Spectral width (FWHM) Output power (CW, typical) Stability1) • Short term (15 min) • Long term (8 h) LASER Singlemode (SM) 9/125 SC adapter yes CW, 270 Hz, 330 Hz, 1 kHz, 2 kHz yes 1310 nm (20 nm), 1550 nm (20 nm), 1625 nm (5 nm) < 5 nm -6 dBm 0.02 dB 0.05 dB 1) after 20 min. warm-up, at ambient temperature -10 °C to +55 °C, T = ±0.
7 SPECIFICATIONS GENERAL SPECIFICATIONS General specifications Calibration interval Recommended recalibration interval Power Supply Dry batteries Rechargeable batteries Power consumption AC line operation Power saving Maximum battery run time1) • OLS-34V2: • OLS-35V2: • OLS-36V2: • OLS-38V2: 3 years 2 x AA, 1.5 V (never use batteries based on lithium) NiMH, 2 x AA, 1.2 V 2.5 W max. With separate 5 V DC USB adapter. Use EMC and safety certified low energy adapters only. Auto power-off after approx.
8 ORDERING I NFORMATION D EVICES 8 ORDERING I NFORMATION Devices OLS-34V2 LED Source, 850/1300 nm, MM 50/125 SC adapter OLS-34V2 OLS-35V2 Laser Source, 1310/1550 nm, SM 9/125 SC adapter OLS-35V2 OLS-36V2 LED Source, 850/1300 nm, MM 50/125 Laser Source, 1310/1550 nm, SM 9/125 SC adapter OLS-36V2 OLS-38V2 Laser Source, 1310/1550/1625 nm, SM 9/125 SC adapter OLS-38V2 Calibration report OLS-34V2, OLS-35V2, OLS-36V2, OLS-38V2 BN 2303/90.
9 P RODUCT R EGULATORY COMPLIANCE A CCESSORIES 9 P RODUCT R EGULATORY COMPLIANCE J All information about the product regulatory compliance can be found in the printed booklett “ Safety, Disposal and Environmental Protection“ provided with your device.
9 P RODUCT R EGULATORY COMPLIANCE A CCESSORIES OLS-34V2/-35V2/-36V2/-38V2 27
North America Latin America China Germany User manual SmartPocketTM V2 Optical Light Sources OLS-34V2/-35V2/-36V2/-38V2 +1 844-468 4284 +1 954 688 5660 +86 21 6859 5260 +49 7121 86 0 Viavi product specifications and descriptions in this document are subject to change without notice. © 2021 viavisolutions.
