Manual

22 OLP-37XV2
5 MEMORY MANAGEMENT
GENERAL INFORMATION
5 MEMORY MANAGEMENT
General information
The OLP-37XV2 allows you to save the measured power level
values in a data memory and recall them as required.
Up to 1000 results can be stored.
NOTE: See also “Specifications” on page 27 for additional data
management tools.
Storing measurements
J Press [G] to save the current result.
The result is saved when "Saving ..." appears on the display and
below the name of the currently saved data.
The results are always stored with the current date-/ timestamp
(e.g. 2021-01-13T16-05-52, corresponding to
January 13'th 2021 at 16h:05min:52s)
The new results are always appended successively at the last
memory location, even if you clear a previously assigned
memory location with a lower number.
Recalling measurements
1. Long press [G].
The device shows the list of saved measurements.