Manual

15
Wet → Dry Clean
Clean
Clean Patch Cord with the IBC™ Cleaner
CLEAN
Guide Cap Nozzle extender lockNozzle
Guide cap cover
. Select the appropriate cleaning tool for
the connector type.
. Pull off the guide cap cover.
Guide cap cover
Dry Clean
Impact
Wet → Dry Clean
. Attach the cleaning tool to the
connector and push the cleaner into
the patch cord two times (two clicks).
. Determine whether clean or dirty.
y If clean, do not touch it and CONNECT
y If dirty, either repeat step  or go to
step 
. Apply a fiber optic cleaning solution
onto a clean fiber wipe.
. Wipe the end of the fiber connector on
the wet area of the wipe, then
go to step .
Repeat steps 3, 4, and 5 if necessary.
Push into patch cord two times (two clicks)