Manual

OPERATION
3
FiberChek Video Inspection Probe 7
CHAPTER 3 FiberChek Video Inspection Probe
Getting Started with PASS/FAIL Analysis
1. From the Live Inspection View, tap the Touchscreen Display to enter the
Menu.
2. Select PROFILE using the Manual Focus/Navigation Control, then press the
Action Button.
3. Choose the desired inspection prole using the Manual Focus/Navigation
Control, then conrm your selection by pressing the Action Button.
4. Return to the Menu by pressing the Magnication/Return Button.
5. Select TIP using the Manual Focus/Navigation Control, then press the Action
Button.
6. Chose the desired tip using the Manual Focus/Navigation Control, then
conrm your selection by pressing the Action Button.
7. Return to the Live Inspection View by pressing the Autofocus/Inspection
Trigger once, or by pressing the Magnication/Return Button twice.
FiberChek is ready to perform PASS/FAIL Analysis.
Setting Up PASS/
FAIL Analysis: