Datasheet

 FiberChek Probe Microscope
Automate your Inspection Workflow with the Press of a Button
Contaminated connectors are the #1 cause for troubleshooting in optical networks. Maintaining best practices with
an Inspect Before You Connect workflow is essential, but without the right tools, it is difficult and time consuming.
FiberChek eliminates these challenges by fully automating every detail of the inspection workflow. Give your
technicians the capabilities to work Fiber Smart!
1. Find the fiber.
2. Focus the image.
3. Analyze the fiber end face.
4. Record the results.
Fast and Easy Inspection Where You Need It
Fiber connections are everywhere. Unfortunately, some places are harder
to access than others. At VIAVI, it’s our goal to ensure that technicians can
maintain best practices everywhere in their network, regardless of the location,
accessibility, or connector type. Inspect Before You Connect (IBYC) is recognized
throughout the world as the best practice to ensure clean fiber connections.
FiberChek ensures that IBYC is easy and routine, letting technicians:
y Climb towers, poles, etc.
y Reach overhead raceways
y Access high-density patch panels and tray systems
y Check multi-fiber ribbon connectors
y Test connectors on cards and circuit boards
Standard tips Long reach tips
60-degree angled
Ribbon tips
And, it supports all existing FBPT inspection tips such as standard,
long reach, ribbon, 60-degree angled, and many more. Technicians
leverage their existing tips with no new investment!