Manual

 A Quick Start Guide to Fiber-to-the-Antenna (FTTA) Installation and Maintenance Testing
Clean
Clean Bulkhead with the IBC™
CLEAN
Guide Cap Nozzle extender lockNozzle
Guide cap cover
. Select the appropriate cleaning tool
for the connector type.
. Pull off the guide cap cover.
Guide cap cover
Dry Clean
Impact
Wet
→ Dry Clean
. Attach the cleaning tool to the
connector and push the cleaner
into the patch cord two times
(two clicks).
Determine whether clean or dirty.
. If clean, do not touch it
and CONNECT
. If dirty, either repeat step 
or go to step 
. Apply a fiber optic cleaning
solution onto a clean fiber wipe.
. Wipe the end of the fiber
connector on the wet area of
the wipe, then go to step .
Push into patch cord two times (two clicks)
Repeat steps 3, 4, and 5 if necessary.